In this post I will some tips for setting up RMAN in RAC environment.
I will not cover topics about RMAN that can be configured in standalone environment (e.g Incremental backup, use of FRA, etc.)
First question: Is there a difference of setting up RMAN between standalone and RAC environments?
The answer is YES, not too much but some points must be observed.
First of all, In my point of view use RMAN Catalog is mandatory. Because it’s a HA environment and to restore a database without RMAN Catalog can take long time.
To protect and keep backup metadata for longer retention times than can be accommodated by the control file, you can create a recovery catalog. You should create the recovery catalog schema in a dedicated standalone database. Do not locate the recovery catalog with other production data. If you use Oracle Enterprise Manager, you can create the recovery catalog schema in the Oracle Enterprise Manager repository database.
About HA of RMAN Catalog?
I always recommend to place the Host that will hold RMAN Catalog on VirtualMachine, because is a machine which require low resource and disk space and have low activity.
In case of the failure of Host RMAN Catalog is easy move that host to another Physical Host or Recover the whole virtual machine.
But if the option of use a VM is not avaliable. Use another cluster (e.g Test Cluster) env if avaliable.
The Database of RMAN catalog must be in ARCHIVELOG. Why?
It’s a prod env (is enough), will generate very small amount of archivelogs, and in case of any corruption or user errors (e.g User generated new incarnation of Prod Database during a Test Validation of Backup in Test env) can be necessary recovery point in time.
Due a small database of low activity I see some customers not giving importance to this database. It’s should not happens.
High availability of execution of backup using RMAN:
We have some challenges:
- The backup must not affect the availability cluster, but the backup must be executed daily.
- The backup cannot be dependent of nodes (i.e backup must be able to execute in all nodes independently if have some nodes active or not)
- Where store the scripts of backup? Where store the Logs?
I don’t recommend use any nodes of cluster to start/store scripts backups. Due if that node fail backup will not be executed.
Use the Host where is stored RMAN Catalog to store your backup scripts too and start these scripts from this host, the utility RMAN works as client only… the backup is always performed on server side.
Doing this you will centralize all scripts and logs of backup from your environment. That will ease the management of backup.
Configuring the RMAN Snapshot Control File Location in a RAC 11.2
RMAN creates a copy of the control file for read consistency, this is the snapshot controlfile. Due to the changes made to the controlfile backup mechanism in 11gR2 any instances in the cluster may write to the snapshot controlfile. Therefore, the snapshot controlfile file needs to be visible to all instances.
The same happens when a backup of the controlfile is created directly from sqlplus any instance in the cluster may write to the backup controfile file.
In 11gR2 onwards, the controlfile backup happens without holding the control file enqueue. For non-RAC database, this doesn’t change anything.
But, for RAC database, the snapshot controlfile location must be in a shared file system that will be accessible from all the nodes.
The snapshot controlfile MUST be accessible by all nodes of a RAC database.
See how do that:
Since version 11.1 : Node Affinity Awareness of Fast Connections
In some cluster database configurations, some nodes of the cluster have faster access to certain data files than to other data files. RMAN automatically detects this, which is known as node affinity awareness. When deciding which channel to use to back up a particular data file, RMAN gives preference to the nodes with faster access to the data files that you want to back up. For example, if you have a three-node cluster, and if node 1 has faster read/write access to data files 7, 8, and 9 than the other nodes, then node 1 has greater node affinity to those files than nodes 2 and 3.
Channel Connections to Cluster Instances with RMAN
Channel connections to the instances are determined using the connect string defined by channel configurations. For example, in the following configuration, three channels are allocated using dbauser/pwd@service_name. If you configure the SQL Net service name with load balancing turned on, then the channels are allocated at a node as decided by the load balancing algorithm.
However, if the service name used in the connect string is not for load balancing, then you can control at which instance the channels are allocated using separate connect strings for each channel configuration. So,your backup scripts will fail if that node/instance is down.
So, my recommendation in admin-managed database environment is create a set of nodes to perform the backup.
E.g : If you have 3 nodes you should use one or two node to perform backup, while the other node is less loaded. If you are using Load Balance in your connection… the new connection will be directed to the least loaded node.
Autolocation for Backup and Restore Commands
RMAN automatically performs autolocation of all files that it must back up or restore. If you use the noncluster file system local archiving scheme, then a node can only read the archived redo logs that were generated by an instance on that node. RMAN never attempts to back up archived redo logs on a channel it cannot read.
During a restore operation, RMAN automatically performs the autolocation of backups. A channel connected to a specific node only attempts to restore files that were backed up to the node. For example, assume that log sequence 1001 is backed up to the drive attached to node1, while log 1002 is backed up to the drive attached to node2. If you then allocate channels that connect to each node, then the channel connected to node1 can restore log 1001 (but not 1002), and the channel connected to node2 can restore log 1002 (but not 1001).
Configuring Channels to Use Automatic Load Balancing
To configure channels to use automatic load balancing, use the following syntax:
CONFIGURE DEVICE TYPE [disk | sbt] PARALLELISM number_of_channels;
Where number_of_channels is the number of channels that you want to use for the operation. After you complete this one-time configuration, you can issue BACKUP or RESTORE commands.
Setup Parallelism on RMAN is not enough to keep a balance, because if you start the backup from remote host using default SERVICE_NAME and if you are using parallelism the RMAN can start a session in each node and the backup be performed by all nodes at same time, this is not a problem, but can cause a performance issue on your environment due high load.
Even at night the backup can cause performance problems due maintenance of the database (statistics gathering, verification of new SQL plans “automatic sql tuning set”, etc).
The bottlenecks are usually in or LAN or SAN, so use all nodes to perform backup can be a waste. If the backup is run via LAN you can gain by using more than one node, but the server that is receiving the backup data will become a bottleneck.
I really don’t like to use more than 50% of nodes of RAC to execute backup due it can increase the workload in all nodes of clusters and this can be a problem to the application or database.
So, thinking to prevent it we can configure a Database Service to control where backup will be performed.
Creating a Database Service to perform Backup
Before start I should explain about limitation of database service.
Some points about Oracle Services.
When a user or application connects to a database, Oracle recommends that you use a service for the connection. Oracle Database automatically creates one database service (default service is always the database name) when the database is created. For more flexibility in the management of the workload using the database, Oracle Database enables you to create multiple services and specify which database instances offer the services.
You can define services for both policy-managed and administrator-managed databases.
- Policy-managed database: When you define services for a policy-managed database, you assign the service to a server pool where the database is running. You can define the service as either uniform (running on all instances in the server pool) or singleton (running on only one instance in the server pool).
- Administrator-managed database: When you define a service for an administrator-managed database, you define which instances normally support that service. These are known as the
PREFERREDinstances. You can also define other instances to support a service if the preferred instance fails. These are known as
About Service Failover in Administrator-Managed Databases
When you specify a preferred instance for a service, the service runs on that instance during normal operation. Oracle Clusterware attempts to ensure that the service always runs on all the preferred instances that have been configured for a service. If the instance fails, then the service is relocated to an available instance. You can also manually relocate the service to an available instance.
About Service Failover in Policy-Managed Databases
When you specify that a service is UNIFORM, Oracle Clusterware attempts to ensure that the service always runs on all the available instances for the specified server pool. If the instance fails, then the service is no longer available on that instance. If the cardinality of the server pool increases and a instance is added to the database, then the service is started on the new instance. You cannot manually relocate the service to a specific instance.
When you specify that a service is SINGLETON, Oracle Clusterware attempts to ensure that the service always runs on only one of the available instances for the specified server pool. If the instance fails, then the service fails overs to a different instance in the server pool. You cannot specify which instance in the server pool the service should run on.
For SINGLETON services, if a service fails over to an new instance, then the service is not moved back to its original instance when that instance becomes available again.
Summarizing about use Services
If your database is Administrator-Managed we can create a service and define where backup will be executed, and how much nodes we can use with preferred and available nodes.
If your database is Policy-Managed we cannot define where backup will be executed, but we can configure a service SINGLETON, that will be sure that backup will be executed in only node, if that node fail the service will be moved to another available node, but we cannot choose in which node backup will be performed.
For connections to the target and auxiliary databases, the following rules apply:
Starting with 10gR2, these connections can use a connect string that does not bind to any particular instance. This means you can use load balancing.
Once a connection is established, however, it must be a dedicated connection that cannot migrate to any other process or instance. This means that you still can’t use MTS or TAF.
Example creating service for Administrator-Managed Database
The backup will be executed on db11g2 and db11g3, but can be executed on db11g1 if db11g2 and db11g3 fail.
Set ORACLE_HOME to same used by Database
$ srvctl add service -d db_unique_name -s service_name -r preferred_list [-a available_list] [-P TAF_policy] $ srvctl add service -d db11g -s srv_rman -r db11g2,db11g3 -a db11g1 -P NONE -j LONG $ srvctl start service -d db11g -s srv_rman
Example creating service for Policy-Managed Database
Using a service SINGLETON the backup will be executed on node which service was started/assigned. The service will be changed to another host only if that node fail.
Set ORACLE_HOME to same used by Database
$ srvctl config database -d db11g |grep "Server pools" Server pools: racdb11gsp $ srvctl add service -d db11g -s srv_rman -g racdb11gsp -c SINGLETON $ srvctl start service -d db11g -s srv_rman
If you have more than 2 nodes on cluster (with policy managed database) and you want use only 2 or more nodes to perform backup, you can choose the options below.
Configure a Service UNIFORM (the service will be available on all nodes) you can control how much instance will be used to perform backup, but you cannot choose in which node backup will be performed. In fact the service does not control anything, you will set PARALLELISM (RMAN) equal number of nodes wich you want use .
Ex: I have 4 Nodes but I want start backup in 2 nodes. I must choose parallelism 2. Remember that Oracle can start 2 Channel on same host, this depend on workload of each node.
Using Policy Managed Database you should be aware that you do not care where (node) each instance is running, you will have a pool with many nodes and Oracle will manage all resources inside that pool. For this reason is not possible to control where you will place a heavier load.
This will only work if you are performing online backup or are using Parallel Backup.
Configuring RMAN to Automatically Backup the Control File and SPFILE
If you set CONFIGURE CONTROLFILE AUTOBACKUP to ON, then RMAN automatically creates a control file and an SPFILE backup after you run the BACKUP or COPYcommands. RMAN can also automatically restore an SPFILE, if this is required to start an instance to perform recovery, because the default location for the SPFILE must be available to all nodes in your Oracle RAC database.
These features are important in disaster recovery because RMAN can restore the control file even without a recovery catalog. RMAN can restore an autobackup of the control file even after the loss of both the recovery catalog and the current control file. You can change the default name that RMAN gives to this file with the CONFIGURE CONTROLFILE AUTOBACKUP FORMAT command. Note that if you specify an absolute path name in this command, then this path must exist identically on all nodes that participate in backups.
RMAN performs the control file autobackup on the first allocated channel. Therefore, when you allocate multiple channels with different parameters, especially when you allocate a channel with the CONNECT command, determine which channel will perform the control file autobackup. Always allocate the channel for this node first.
In this post I will show you how to setting up environment high availability without the option Oracle RAC.
Oracle Fail Safe is available only for Windows, for Unix / Linux would need third party software Cluster to do the Failover.
Good News From Oracle:
Oracle Clusterware provides cluster membership and high availability services. It provides the cluster membership for features such as Oracle Real Application Clusters and Oracle ASM. It includes the following features:
- Application monitoring, restart, and failover
- Cluster membership services
- Server monitoring and fencing
- Single Client Access Name (SCAN)
- Server Pools
- Grid Naming Services
Oracle Clusterware can be used to protect any application (restarting or failing over the application in the event of a failure), free of charge, if one or more of the following conditions are met:
- The server OS is supported by a valid Oracle Unbreakable Linux support contract.
- The product to be protected is either:
- Any Oracle product (e.g. Oracle Applications, Siebel, Hyperion, Oracle Database EE, Oracle Database XE)
- Any third-party product that directly or indirectly stores data in an Oracle database
- At least one of the servers in the cluster is licensed for Oracle Database (SE or EE)
A cluster is defined to include all the machines that share the same Oracle Cluster Registry (OCR) and Voting Disk.
See step by step here using clusterware 11.1, we can improvise this setup to 11.2 using SCAN feature which is more easy.
Recently we discovered a possible vulnerability on SCAN Listener, so we opened SR and Oracle give us a solution.
I recommend all apply this security. “As far as I know only the availability can be affected, none concern about data integrity” .
Thread: How prevent REMOTE LISTENER register on SCAN LISTENER
Oracle Security Alert for CVE-2012-1675
This security alert addresses the security issue CVE-2012-1675, a vulnerability in the TNS listener which has been recently disclosed as “TNS Listener Poison Attack” affecting the Oracle Database Server. This vulnerability may be remotely exploitable without authentication, i.e. it may be exploited over a network without the need for a username and password. A remote user can exploit this vulnerability to impact the confidentiality, integrity and availability of systems that do not have recommended solution applied.
Affected Products and Versions
Oracle Database 11g Release 2, versions 220.127.116.11, 18.104.22.168
Oracle Database 11g Release 1, version 22.214.171.124
Oracle Database 10g Release 2, versions 10.2.0.3, 10.2.0.4, 10.2.0.5
Recommendations for protecting against this vulnerability can be found at:
- My Oracle Support Note 1340831.1 for Oracle Database deployments that use Oracle Real Application Clusters (RAC).
- My Oracle Support Note 1453883.1 for Oracle Database deployments that do not use RAC.
Please note that Oracle has added Oracle Advanced Security SSL/TLS to the Oracle Database Standard Edition license when used with the Real Application Clusters and Oracle has added Oracle Advanced Security SSL/TLS to the Enterprise Edition Real Application Clusters (Oracle RAC) and RAC One Node options so that the directions provided in the Support Notes referenced above can be applied by all Oracle customers without additional cost.
Note: Please refer to the Oracle licensing documentation available on Oracle.com regarding licensing changes that allow Oracle Advanced Security SSL/TLS to be used with Oracle SE Oracle Real Application Clusters and Oracle Enterprise Edition Real Application Customers (Oracle RAC) and Oracle RAC OneNode Options.
Due to the threat posed by a successful attack, Oracle strongly recommends that customers apply this Security Alert solution as soon as possible.
To a DBA time is money. In cases of downtime …. more time stoped, less money and less time stoped, more money.
Many times we make mistakes for not knowing all the resources available in certain situations that require quick action.
When someone calls you and says that a someone mistakenly deleted data, usually the first thought that comes is that we need to perform the restore of the data.
Here comes an important issue. How to restore data in a short period to cause less impact and less downtime.
Below is the request of a colleague who was in this situation, read:
One of our DBA colleagues accidently updated all the records of a table to a particular values without a WHERE clause.I need to revert it back to its previous state (as of 11 am today morning)
Since this is 3 TB schema, we don’t take logical backup for this schema. Flashback feauture is not enabled either.
I have LEVEL0 backup from Monday morning and LEVEL1 backup from Tuesday (today) morning. How can I restore the table to the previous state?
We have many options, but what option you decide to use will make all difference.
The first feature that I will try to use is the FLASHBACK QUERY. Although this feature exists since version 9i unfortunately for many people is still a novelty.
$ sqlplus user_test@db11g SQL*Plus: Release 126.96.36.199.0 Production on Fri Feb 3 14:32:56 2012 Copyright (c) 1982, 2009, Oracle. All rights reserved. Enter password: Connected to: Oracle Database 11g Release 188.8.131.52.0 - Production With the Automatic Storage Management option SQL> select flashback_on from v$database; FLASHBACK_ON ------------------ NO ### CREATING TABLE############ SQL> CREATE TABLE USER_ERROR AS SELECT * FROM DBA_OBJECTS; Table created. ############################## ### Populating Data ########## INSERT INTO USER_ERROR SELECT * FROM USER_ERROR; COMMIT; 76416 rows inserted commited INSERT INTO USER_ERROR SELECT * FROM USER_ERROR; COMMIT; 152832 rows inserted commited INSERT INTO USER_ERROR SELECT * FROM USER_ERROR; COMMIT; 305664 rows inserted commited INSERT INTO USER_ERROR SELECT * FROM USER_ERROR; COMMIT; 611328 rows inserted commited ############################## ### Checking Data SELECT COUNT(1) FROM USER_ERROR; COUNT(1) ---------------------- 1222656 SQL> select count(object_type) qtd,object_type from user_error group by object_type order by 1; QTD OBJECT_TYPE ---------- ------------------- 16 LOB PARTITION 16 EDITION 16 MATERIALIZED VIEW 16 RULE 32 DESTINATION 48 JAVA SOURCE 48 SCHEDULE 64 SCHEDULER GROUP 112 CONTEXT 144 INDEXTYPE 144 WINDOW 144 UNDEFINED 160 RESOURCE PLAN 160 CLUSTER 208 EVALUATION CONTEXT 208 JOB CLASS 256 DIRECTORY 304 RULE SET 304 PROGRAM 400 CONSUMER GROUP 448 JOB 576 QUEUE 816 XML SCHEMA 880 OPERATOR 2928 LIBRARY 3552 PROCEDURE 3824 TYPE BODY 3984 SEQUENCE 4448 TABLE PARTITION 4864 INDEX PARTITION 4880 JAVA DATA 5392 FUNCTION 13344 JAVA RESOURCE 17168 TRIGGER 17296 LOB 23680 PACKAGE BODY 24752 PACKAGE 44624 TYPE 58752 TABLE 84384 INDEX 86384 VIEW 366768 JAVA CLASS 446112 SYNONYM 43 rows selected. SQL> SELECT CURRENT_TIMESTAMP FROM DUAL; CURRENT_TIMESTAMP --------------------------------------------------------------------------- 03-FEB-12 02.38.08.300885 PM -02:00 ### UPDATE WITHOUT WHERE CLAUSE SQL> UPDATE USER_ERROR SET OBJECT_TYPE='UNKNOWN'; 1222656 rows updated. SQL> COMMIT; Commit complete. SQL> select count(object_type) qtd,object_type from user_error group by object_type order by 1; QTD OBJECT_TYPE ---------- ------------------- 1222656 UNKNOWN ###### RECOVERING DATA QUICKLY ##### SQL> CREATE TABLE USER_ERROR_RECOVERED AS SELECT * FROM USER_ERROR AS OF TIMESTAMP TO_TIMESTAMP('03-02-2012 14:38:08','DD-MM-YYYY HH24:MI:SS'); Table created. SQL> SELECT COUNT(1) FROM USER_ERROR_RECOVERED; COUNT(1) ---------- 1222656 SQL> select count(object_type) qtd,object_type from user_error_recovered group by object_type order by 1; QTD OBJECT_TYPE ---------- ------------------- 16 RULE 16 LOB PARTITION 16 MATERIALIZED VIEW 16 EDITION 32 DESTINATION 48 JAVA SOURCE 48 SCHEDULE 64 SCHEDULER GROUP 112 CONTEXT 144 UNDEFINED 144 WINDOW 144 INDEXTYPE 160 CLUSTER 160 RESOURCE PLAN 208 JOB CLASS 208 EVALUATION CONTEXT 256 DIRECTORY 304 PROGRAM 304 RULE SET 400 CONSUMER GROUP 448 JOB 576 QUEUE 816 XML SCHEMA 880 OPERATOR 2928 LIBRARY 3552 PROCEDURE 3824 TYPE BODY 3984 SEQUENCE 4448 TABLE PARTITION 4864 INDEX PARTITION 4880 JAVA DATA 5392 FUNCTION 13344 JAVA RESOURCE 17168 TRIGGER 17296 LOB 23680 PACKAGE BODY 24752 PACKAGE 44624 TYPE 58752 TABLE 84384 INDEX 86384 VIEW 366768 JAVA CLASS 446112 SYNONYM 43 rows selected. ### DROPPING TABLE ####### SQL> DROP TABLE USER_ERROR; Table dropped. SQL> SELECT COUNT(1) FROM USER_ERROR; SELECT COUNT(1) FROM USER_ERROR * ERROR at line 1: ORA-00942: table or view does not exist SQL> FLASHBACK TABLE USER_ERROR TO BEFORE DROP; Flashback complete. SQL> SELECT COUNT(1) FROM USER_ERROR; COUNT(1) ---------- 1222656 SQL>
In the example above I was able to restore data in a short time, saving work and time.
For this procedure succeeds the data must still be in the UNDO tablespace, then when more quickly you identify the error and try to fix it, Will increase the probability of success.
Oracle used the term “flashback” to cover very different things, I don’t like this because it confuse which feature we can use.
To use Flasback Table or Flasback Query you don’t need the “flashback feature” enabled, because flashback query is based on undo information, unlike flashback database which needs flashback logs + redo logs.
What Oracle Editions I can use feature flasback query?
Flashback Query – Is enabled to use in all Oracle Editions no additional cost.
What Oracle Editions I can use feature flasback table?
Flashback Table – Is enabled to use only in Oracle Enterprise Edition. (Works in SE edition)
RACcheck is a tool developed by the RAC Assurance development team for use by customers to automate the assessment of RAC systems for known configuration problems and best practices.
RACcheck is a RAC Configuration Audit tool designed to audit various important configuration settings within a Real Application Clusters (RAC), Oracle Clusterware (CRS), Automatic Storage Management (ASM) and Grid Infrastructure environment. The tool audits configuration settings within the following categories:
- OS kernel parameters
- OS packages
- Many other OS configuration settings important to RAC.
- CRS/Grid Infrastructure
- Database parameters
- Many other database configuration settings important to RAC.
1. RACcheck is NON-INTRUSIVE and does not change anything in the environment, except as detailed below:
– SSH user equivalence for the RDBMS software owner is assumed to be configured among all the database servers being audited in order for it to execute commands on the remote database server nodes. If the tool determines that this user equivalence is not established it will offer to set it up either temporarily or permanently at the option of the user. If the user chooses to set up SSH user equivalence temporarily then the script will do so for the duration of the execution of the tool but then it will return the system to the state in which it found SSH user equivalence originally. For those wishing to configure SSH user equivalence outside the tool (if not already configured), consult My Oracle Support Note: 372795.1.
– RACcheck creates a number of small output files into which the data necessary to perform the assessment is collected
– RACcheck creates and executes some scripts dynamically in order to accomplish some of the data collection
– RACcheck cleans up after itself any temporary files that are created and not needed as part of the collection.
2. RACcheck interrogates the system to determine the status of the Oracle stack components (ie., Grid Infrastructure, RDBMS, RAC, etc) and whether they are installed and/or running. Depending upon the status of each component, the tool runs the appropriate collections and audit checks. If due to local environmental configuration the tool is unable to properly determine the needed environmental information please refer to the TROUBLESHOOTING section.
3. Watchdog daemon – RACcheck automatically runs a daemon in the background to monitor command execution progress. If, for any reason, one of the commands run by the tool should hang or take longer than anticipated, the monitor daemon kills the hung command after a configurable timeout so that main tool execution can progress. If that happens then the collection or command that was hung is skipped and a notation is made in the log. If the default timeout is too short please see the TROUBLESHOOTING section regarding adjustment of the RAT_TIMEOUT, and RAT_ROOT_TIMEOUT parameters.
4. If RACcheck’s driver files are older than 90 days, the driver files are considered to be “stale” and the script will notify the user of a stale driver file. A new version of the tool and its driver files (kit) must be obtained from MOS Note 1268927.1.
5. When the RACcheck completes the collection and analysis it produces two reports, summary and detailed. A output .zip file is also produced by RACcheck. This output .zip file can be provided to Oracle Support for further analysis if an SR needs to be logged. The detailed report will contain Benefit/Impact, Risk and Action/Repair information. In many cases it will also reference publicly available documents with additional information about the problem and how to resolve it.
6. The results of the audit checks can be optionally uploaded into database tables for reporting purposes. See below for more details on this subject.
7. In some cases customers may want to stage RACcheck on a shared filesystem so that it can be accessed from various systems but be maintained in a single location rather than being copied to each cluster on which it may be used. The default behavior of the tool is to create a subdirectory and its output files in the location where the tool is staged. If that staging area is a read only filesystem or if the user for any reason would like the output to be created elsewhere then there is an environment variable which can be used for that purpose. The RAT_OUTPUT parameter can be set to any valid writable location and the output will be created there.
Oracle Server – Enterprise Edition – Version: 10.2.0.1 to 184.108.40.206 – Release: 10.2 to 11.2
- Linux x86
- IBM AIX on POWER Systems (64-bit)
- Oracle Solaris on SPARC (64-bit)
- Linux x86-64
To download RAC Check tool use this note on MoS:
RACcheck – RAC Configuration Audit Tool [ID 1268927.1]
Example of report output:
Several times I have faced problems like this. I know it’s a simple problem to solve, but I’ll leave this tip.
Recently installing Oracle 220.127.116.11 on an AIX environment I faced a problem during installation.
The error was: – Invalid distance code. What’s that????????????? Bug on 18.104.22.168? Maybe!!!
Neither at moon you can find the solution for this error.
So, I wasted no time trying debugging OUI, I realized that the error was raised during the extraction of binary installation, so I took a shortcut.
In UNIX/Linux unzip utility extract files even if they are corrupted.
So, the installation files are corrupted and I did not heed it.
unzip -t p10404530_112030_AIX64-5L_1of7.zip |grep -v OK Archive: p10404530_112030_AIX64-5L_1of7.zip testing: database/stage/Components/oracle.nlsrtl.rsf/22.214.171.124.0/1/DataFiles/filegroup1.jar bad CRC 0e90be4a (should be d9efb175) bad CRC 0e90be4a (should be d9efb175) bad CRC 6c68df26 (should be 8a9ea9bb) testing: database/stage/Components/oracle.sysman.oms.core/10.2.0.4.4/1/DataFiles/filegroup7.jar bad CRC 6c68df26 (should be 8a9ea9bb) At least one error was detected in p10404530_112030_AIX64-5L_1of7.zip. unzip -t p10404530_112030_AIX64-5L_2of7.zip |grep -v OK Archive: p10404530_112030_AIX64-5L_2of7.zip error: invalid compressed data to inflate testing: database/stage/Components/oracle.rdbms.install.seeddb/126.96.36.199.0/1/DataFiles/Expanded/filegroup1/Seed_Database.dfb error: invalid compressed data to inflate At least one error was detected in p10404530_112030_AIX64-5L_2of7.zip.
Always test your installation zip files, before extract it.
unzip -t p10404530_112030_AIX64-5L_1of7.zip |grep -v OK Archive: p10404530_112030_AIX64-5L_1of7.zip No errors detected in compressed data of p10404530_112030_AIX64-5L_1of7.zip. unzip -t p10404530_112030_AIX64-5L_2of7.zip |grep -v OK Archive: p10404530_112030_AIX64-5L_2of7.zip No errors detected in compressed data of p10404530_112030_AIX64-5L_2of7.zip.
I hope this helps.